Print | Rate this content

HP LaserJet 1000 Series Printers - Installing the Software Patch

Perform the following to install the software patch.

NOTE: The HP LaserJet 1000 printer driver must be installed before the patch is installed to function correctly.
  1. Click here to download the software patch from the HP LaserJet 1000 Drivers and Download page from the HP Web Site at http://welcome.hp.com/country/us/en/support.html.

  2. Open and run the patch utility.

  3. Restart the computer.

  4. While the computer is restarting disconnect the HP LaserJet 1000 USB cable from the computer.

  5. When the computer is back to the Windows desktop, reconnect the USB cable to the computer.

  6. Power cycle the HP LaserJet 1000 printer by disconnecting and then reconnecting the power cable from the power source.

  7. Print a test page from the printer driver to test printer functionality.

  8. Restart the computer and verify printing again.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!