Print | Rate this content

HP LaserJet 2300 Printer Series - Installing Print Cartridges

Installing the print cartridge

Use the following steps to install the print cartridge.

  1. Remove the print cartridge from its packaging.
  2. Flex the black tab back and forth until it breaks away from the cartridge.

    Figure 1: Black tab on print cartridge

  3. Pull the sealing tape from the end of the print cartridge to remove the entire length of tape.

    Figure 2: Sealing tape on print cartridge

    CAUTION: Avoid touching any black toner on the tape. If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water.
  4. Open the top cover of the printer.
  5. Position the print cartridge with the arrow on top of the cartridge pointing into the printer and slide the cartridge into the printer as far as it can go.

    Figure 3: Print cartridge positioned in printer

  6. Close the top cover.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!