Print | Rate this content

HP Color LaserJet 2600n - Configuring a Static IP Address

Use the following steps to manually configure IP address from the control panel.
NOTE: The TCP/IP settings can also be configured through the Embedded Web Server. Type the IP address for the printer in the address/URL field in a supported Web browser on the computer to open the Embedded Web Server and click the Networking tab.
  1. Press (LEFT ARROW) or (RIGHT ARROW) to select the Network configuration menu.

  2. Press (SELECT).

  3. Press (LEFT ARROW) or (RIGHT ARROW) to select the TCP/IP menu.

  4. Press (SELECT).

  5. Press (LEFT ARROW) or (RIGHT ARROW) to select Manual .

  6. Press (SELECT).

  7. Press (LEFT ARROW) or (RIGHT ARROW) to enter the first three digits of the IP address.

  8. Press (SELECT) to save those digits and move to the next three digits of the IP address.

  9. Press (LEFT ARROW) or (RIGHT ARROW) to enter the next three digits of the IP address.

  10. Press (SELECT) to save those digits and move to the next three digits of the IP address.

  11. Press (LEFT ARROW) or (RIGHT ARROW) to enter the next three digits of the IP address.

  12. Press (SELECT) to save those digits and move to the next three digits of the IP address.

  13. Press (LEFT ARROW) or (RIGHT ARROW) to enter the next three digits of the IP address.

  14. Press (SELECT).

  15. The control panel will display Yes . Press (SELECT) to save the configuration, or to delete and re-enter another IP address, press (LEFT ARROW) or (RIGHT ARROW), which will change the display to No .

  16. After selecting the IP address, enter the subnet mask and default gateway when prompted using steps 7-14 above.

  17. If at any time during the configuration press (CANCEL JOB), the system will exit the menu and the addresses will not be saved.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!