Print | Rate this content

HP Color LaserJet 4730mfp Series - Product Specifications

Overview

This document provides detailed information about the HP Color LaserJet 4730mfp series multifunction products which may include but is not limited to specifications regarding physical measurements, supported network operating systems, supplies life, electrical power and environmental requirements, sound emissions, FCC compliance, Declaration of Conformity, HP Environmental Product Stewardship information, and safety statements specific to countries or regions.

About HP Color LaserJet 4730mfp Series

The HP Color LaserJet 4730mfp series is available in the following configurations.

Identifying parts of the MFP

Before using the MFP, familiarize with the parts of the MFP as shown in Figure 5.

Figure 1:

1 - ADF top cover
2 - Automatic document feeder (ADF) input tray for copy/scan/fax originals
3 - Control-panel status lights
4 - Control-panel display with touch-screen functionality
5 - Control-panel keypad
6 - Right-side covers (provides access to the print cartridges and other consumables)
7 - Tray 2, 3, and 4
8 - Paper-level indicators
9 - On/Off switch
10 - Output bin
11 - Scanner lock

Figure 2:

1 - Output bin
2 - Interface ports
3 - On/off switch
4 - Power connection

HP Color LaserJet 4730mfp (Q7517A-base model)

Figure 3:

The HP Color LaserJet 4730mfp comes standard with the following items:

  • A 100-sheet multi-purpose input tray (tray 1)
  • 3-500 sheet input trays
  • An automatic document feeder (ADF) that holds up to 50 pages
  • An HP Jetdirect embedded print server for connecting to a 10/100Base-TX network
  • 256 megabytes (MB) synchronous dynamic random access memory (SDRAM)
  • Duplexer
  • Hard-drive

HP Color LaserJet 4730x mfp (Q7518A)

Figure 4:

The HP Color LaserJet 4730x mfp has the same features as the base model and also includes an analog fax accessory.

HP Color LaserJet 4730xs mfp (Q7519A)

Figure 5:

The HP Color LaserJet 4730xs mfp has the same features as the base model and also includes the following items:

  • An analog fax accessory
  • An output accessory bridge
  • A stapler/stacker accessory

HP Color LaserJet 4730xm mfp (Q7520A)

Figure 6:

The HP Color LaserJet 4730xm mfp has the same features as the base model and also includes the following items:

  • Output accessory bridge
  • An analog fax accessory
  • A 3-bin mailbox accessory

Features and benefits

The HP Color LaserJet 4730mfp series is designed to be shared by a workgroup. Use the MFP to copy and print color and black-and-white documents or to digitally send color or black-and-white documents. The MFP is a standalone copier that does not require connection to a computer. With the optional HP LaserJet Analog Fax Accessory 300 (included with some models), the MFP can also send and receive faxes. With the exception of digital sending and network printing, it would be possible to select all functions at the MFP control panel .

Functions

  • Two-sided copying (duplexing)
  • Image modification
  • Color digital sending
  • Document finishing

Speed and throughput

  • 31 pages per minute (ppm) when scanning and printing on letter-size paper; 30 ppm when copying and printing on A4-size paper

  • 25% to 400% scalability when using the scanner glass

  • 25% to 200% scalability when using the automatic document feeder (ADF)

  • Less than 10 seconds to print the first page

  • Transmit Once, Raster Image Processing (RIP) ONCE technology

  • Duty cycle of up to 85,000 pages per month

  • 533 megahertz (MHz) microprocessor

Resolution

  • 600 dots per inch (dpi) with Resolution Enhancement technology (REt)

  • The product features HP FastRes and HP Resolution Enhancement technology (REt) for 1200 by 1200 effective dpi at full engine speed.

Memory

  • 256 megabytes (MB) of random-access memory (RAM), expandable to 512 MB by using industry standard 100-pin double data rate dual inline memory modules (DDR DIMMs)

  • Memory Enhancement technology (MEt) that automatically compresses data to use RAM more efficiently

User interface

  • Graphic display on the control panel

  • An embedded Web server to gain access to support and order supplies (for network-connected products)

Languages and fonts

  • HP Printer Command Language (PCL) 6
  • HP PCL 5e for compatibility
  • Printer Management Language
  • PDF
  • XHTML
  • 80 scalable TrueType typefaces
  • HP PostScript 3 emulation (PS)

Copying and sending

  • Modes for text, graphics, and mixed text and graphics formats
  • A job-interrupt feature (at copy boundaries)
  • Multiple pages per sheet
  • Operator attendance animations (for example, jam recovery)
  • E-mail compatibility
  • A sleep feature that saves energy
  • Automatic duplex (two-sided) scanning

Print cartridge (4 cartridges)

  • Prints up to 12,000 pages at 5% coverage
  • No-shake cartridge design
  • Authentic HP print cartridge detection
  • Automatic toner strip remover

Paper-handling

  • Input
    • Tray 1 (multipurpose tray): A multipurpose tray for paper, transparencies, labels, and envelopes. Holds up to 100 sheets of paper or 20 envelopes.

    • Tray 2, 3, and 4: 500-sheet trays. These trays automatically detect standard paper sizes up to legal and allow printing on custom-size paper.

    • Automatic document feeder (ADF): Holds up to 50 sheets of paper.

    • Duplex printing and copying: Provides two-sided printing and copying (printing on both sides of the paper).

    • ADF duplex scanning: The ADF has an automatic duplexer for scanning two-sided documents.

  • Output
    • Standard output bin: The standard output bin is located on the left side of the MFP. This bin can hold up to 500 sheets of paper.

    • ADF output bin: The ADF output bin is underneath the ADF input tray. The bin holds up to 50 sheets of paper, and the MFP automatically stops when this bin is full.

    • Optional stapler/stacker: The stapler/stacker staples up to a 30 sheet document and stacks up to 500 sheets.

    • Optional 3-bin mailbox: One bin stacks up to 500 sheets, and two bins stack up to 100 sheets each for a total capacity of 700 sheets.

Connectivity

  • IEEE 1284C-compliant parallel connection
  • A Foreign Interface Harness (FIH) connection (AUX) for connecting other devices
  • Local area network (LAN) connector (RJ-45) for the embedded HP Jetdirect print server
  • Optional analog fax card
  • Optional HP Digital Sending Software (DSS)
  • Optional enhanced input/output (EIO) cards
  • USB 2.0
  • Host USB (accessory port)
  • Accessory port (for connecting third-party devices)

Environmental features

  • The Sleep setting saves energy (meets ENERGY STAR guidelines, Version 1.0).

Security features

  • Foreign Interface Harness (FIH)
  • Secure Disk Erase
  • Security lock
  • Job retention
  • DSS authentication

Accessories and supplies

It is possible to increase the capabilities of the MFP by adding optional accessories. The optional accessories are shown in Figure 7.

NOTE: Use the accessories and supplies that have been specifically designed for the MFP in order to ensure optimum performance.

Figure 7:

1 - Stapler/stacker (Q7521A). This accessory includes an output accessory bridge
2 - Staple cartridge (C8091A)
3 - Print cartridge (4 print cartridges) (Q6460A, Q6461A, Q6462A, and Q6463A)
4 - 3-bin mailbox (Q7523A) This accessory includes an output accessory bridge
5 - Memory DIMMS and flash memory cards
6 - HP Jetdirect print server (EIO card)
7 - HP LaserJet analog fax accessory 300 (Q3701A)

Interface ports

The MFP has five ports for connecting to a computer or a network. The ports are at the left, rear corner of the MFP.

Figure 8:

1 - Foreign interface harness (FIH)
2 - USB 2.0
3 - Host USB (This accessory port uses host USB protocol.)
4 - Fax connection (for connecting to an optional analog fax accessory)
5 - Parallel port
6 - EIO interface expansion slot
7 - Network connection (embedded HP Jetdirect print server)
8 - Accessory port

Moving the MFP

Before moving the MFP, be sure to lock the scanner. The scanner lock is underneath the scanner lid, to the left of the scanner glass.

top

Minimum system requirements

  • To use the e-mail functionality, the MFP must be connected to an IP-based network that has a simple mail transfer protocol (SMTP) server. This server can either be on the local area network or at an outside Internet service provider (ISP).

  • HP recommends that the MFP be located on the same local area network (LAN) as the SMTP server. If using an ISP, connect to the ISP by using a digital subscriber line (DSL) connection.

  • If obtaining e-mail services from an ISP, ask the ISP to provide the correct SMTP address.

  • Dial-up connections are not supported. If there is no SMTP server available on the network, third-party software is available that allows to create an SMTP server. However, purchase and support of this software is the user's responsibility.

top

Physical specifications

Product dimensions
Product
Height
Depth
Width
Weight1
HP Color LaserJet 4730mfp series
1153 mm (45.4 inches)
639 mm (25.2 inches)
788 mm (31 inches)
124 kg (273 lb)
HP Color LaserJet 4730x mfp
1153 mm (45.4 inches)
639 mm (25.2 inches)
788 mm (31 inches)
124 kg (298 lb)
HP Color LaserJet 4730xs mfp
1153 mm (45.4 inches)
639 mm (25.2 inches)
1106 mm (43.5 inches)
136 kg (298 lb)
HP Color LaserJet 4730xm mfp
1153 mm (45.4 inches)
639 mm (25.2 inches)
1106 mm (43.5 inches)
136 kg (298 lb)
Note 1 Without print cartridge.
Product dimensions - all doors and trays fully opened
Product
Height
Depth
Width
HP Color LaserJet 4730mfp series
1580 mm
(62.2 inches)
980 mm
(38.6 inches)
1160 mm
(45.7 inches)
HP Color LaserJet 4730x mfp
1580 mm
(62.2 inches)
980 mm
(38.6 inches)
1160 mm
(45.7 inches)
HP Color LaserJet 4730xs mfp
1580 mm
(62.2 inches)
980 mm
(38.6 inches)
1588 mm
(62.5 inches)
HP Color LaserJet 4730xm mfp
1580 mm
(62.2 inches)
980 mm
(38.6 inches)
1588 mm
(62.5 inches)

top

Electrical specifications

WARNING: Power requirements are based on the country/region where the MFP is sold. Do not convert operating voltages. This can damage the MFP and void the product warranty.
Power requirements
Specification
110-volt models
230-volt models
Power requirements
  • 115 to 127 volts (± 10%)
  • 50/60 Hz (± 2 Hz)
  • 220 to 240 volts (± 10%)
  • 50/60 Hz (± 2 Hz)
Rated current
9.0 Amps
4.5 Amps
Power consumption (average in watts)1, 2
Product model
Copying3
Printing3
Ready4
Sleep5, 6
Off
HP Color LaserJet 4730mfp series
615
604
83
24
0.5
HP Color LaserJet 4730x mfp
615
604
83
24
0.5
HP Color LaserJet 4730xs mfp
615
604
83
24
0.5
HP Color LaserJet 4730xm mfp
640
626
86
25
0.5
Note 1 Values subject to change. Refer to the following URL: http://www.hp.com/support/clj4730mfp for current information.
Note 2 Power numbers are the highest values measured using all standard voltages.
Note 3 HP Color LaserJet 4730mfp series printing and copying speeds are 31 ppm Letter size and 30 ppm A4 size.
Note 4 Heat dissipation in Ready mode = 288 BTU/hour.
Note 5 Default time from Ready mode to Sleep mode = 45 minutes.
Note 6 Recovery time from Sleep mode = less than 20 seconds.

top

Environmental specifications

Environmental condition
Recommended
Allowed
Storage/standby
Temperature (MFP and print cartridge)
17° to 25°C (62.6° to 77°F)
10° to 35°C (50° to 86°F)
-20° to 40°C (-4° to 104°F)
Relative humidity
30% to 70% relative humidity (RH)
10% to 80% RH
10% to 90%
Altitude
N/A
0 meters (0 feet) to 2600 meters (8530 feet)
N/A

Ideally, the printing and paper storage environment should be at or near room temperature, and not too dry or too humid. Remember paper is hygroscopic; it absorbs and loses moisture rapidly.

Heat works with humidity to damage paper. Heat causes the moisture in paper to evaporate, while cold causes it to condense on the sheets. Heating systems and air conditioners remove most of the humidity from a room. As paper is opened and used, it loses moisture, causing streaks and smudging. Humid weather or water coolers can cause the humidity to increase in a room. As paper is opened and used it absorbs any excess moisture, causing light print and dropouts. Also, as paper loses and gains moisture it can distort. This can cause jams.

As a result, paper storage and handling are as important as the paper-making process itself. Paper storage environmental conditions directly affect the feed operation.

Care should be taken not to purchase more paper than can be easily used in a short time (about 3 months). Paper stored for long periods might experience heat and moisture extremes, which can cause damage. Planning is important to prevent damage to a large supply of paper.

Unopened paper in sealed reams can remain stable for several months before use. Opened packages of paper have more potential for environmental damage, especially if they are not wrapped with a moisture-proof barrier.

The paper storage environment should be properly maintained to ensure optimum MFP performance. The required condition is 20° to 24°C (68° to 75°F), with a relative humidity of 45% to 55%. The following guidelines should be helpful when evaluating the paper's storage environment:

  • Paper should be stored at or near room temperature.

  • The air should not be too dry or too humid (due to the hygroscopic properties of paper).

  • The best way to store an opened ream of paper is to rewrap it tightly in its moisture-proof wrapping. If the MFP environment is subject to extremes, unwrap only the amount of paper to be used during the day's operation to prevent unwanted moisture changes.

top

Acoustic specifications

Sound power and pressure level1
Sound power level
Declared per ISO 9296
Printing2
LWAd = 6.7 Bels (A) [67 dB(A)]
Copying3
LWAd = 6.8 Bels (A) [68 dB(A)]
Ready
LWAd = 5.8 Bels (A) [58 dB(A)]
Sound pressure level
Declared per ISO 9296
Printing2
LpAm =50 dB (A)
Copying3
LpAm =52 dB (A)
Ready
LpAm =37 dB (A)
Note 1 Values subject to change. Refer to the following URL: http://www.hp.com/support/clj4730mfp for current information.
Note 2 HP Color LaserJet 4730mfp series speed is 30 ppm A4 size. Configuration tested (HP Color LaserJet 4730mfp): Base model, simplex printing with A4 paper size.
Note 3 Configuration tested (HP Color LaserJet 4730mfp) Base model, simplex copying from ADF with A4 paper size.)

top

Print media specifications

This section provides specifications for media that can be used in this MFP.

Category
Specifications
Acid content
5.5 pH to 8.0 pH
Caliper
0.094 to 0.18 mm (3.0 to 7.0 mils)
Curl in ream
Flat within 5 mm (0.02 inch)
Cut edge conditions
Cut with sharp blades that create no visible fray
Fusing compatibility
Must not scorch, melt, offset, or release hazardous emissions when heated to 200°C (392°F) for 0.1 second
Grain
Long grain
Moisture content
3% to 9% by weight
Smoothness
100 to 250 Sheffield

Envelopes

Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components:

  • Weight: The weight of the envelope paper should not exceed 105 g/m2 (28 lb) or jamming might occur.

  • Construction: Prior to printing, envelopes should lie flat with less than 6 mm (0.25 inch) curl, and should not contain air.

  • Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged.

  • Temperature: You should use envelopes that are compatible with the heat and pressure of the MFP.

  • Size: You should use only envelopes within the following size ranges.

    • Minimum: 76 x 127 mm (3 x 5 inches)
    • Maximum: 216 x 356 mm (8.5 x 14 inches)
NOTE: Use only tray 1 to print envelopes. You might experience some jams when using any media with a length less than 178 mm (7 inches). This might be caused by paper that has been affected by environmental conditions. For optimum performance, make sure you are storing and handling the paper correctly. Choose envelopes in the printer driver.

Envelopes with double side seams

Double side-seam construction has vertical seams at both ends of the envelope rather than diagonal seams. This style might be more likely to wrinkle. Be sure the seam extends all the way to the corner of the envelope as illustrated below.

Figure 9:

1 - Acceptable envelope construction
2 - Unacceptable envelope construction

Envelopes with adhesive strips or flaps

Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the heat and pressure in the MFP. The extra flaps and strips might cause wrinkling, creasing, or even jams and might even damage the fuser.

Envelope margins

The following gives typical address margins for a commercial #10 or DL envelope.

Type of address
Top margin
Left margin
Return address
15 mm (0.6 inch)
15 mm (0.6 inch)
Delivery address
51 mm (2.0 inches)
89 mm (3.5 inches)
NOTE: For the best print quality, position margins no closer than 15 mm (0.6 inch) from the edges of the envelope. Avoid printing over the area where the envelope's seams meet.

Envelope storage

Proper storage of envelopes helps contribute to print quality. Envelopes should be stored flat. If air is trapped in an envelope, creating an air bubble, then the envelope might wrinkle during printing.

Click here for more information on Envelopes .

Labels

CAUTION: To avoid damaging the MFP, use only labels recommended for laser printers. Never print on the same sheet of labels more than once or print on a partial sheet of labels.

Label construction

When selecting labels, consider the quality of each component:

  • Adhesives: The adhesive material should be stable at 200°C (392°F), the MFP's fusing temperature.

  • Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams.

  • Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.5 inch) of curl in any direction.

  • Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.

NOTE: Choose labels in the printer driver.

Transparencies

Transparencies used in the MFP must be able to withstand 200°C (392°F), the MFP's fusing temperature.

CAUTION: To avoid damaging the MFP, use only transparencies recommended for use in HP LaserJet printers, such as HP-brand transparencies.
NOTE: Choose transparencies in the printer driver.

top

Supported media weights, sizes and capacities

For optimum results, use conventional 75 g/m2 (20 lb) photocopy paper. Verify that the paper is of good quality and is free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, curls, or bent edges.

NOTE: Test any media, particularly custom media, before purchasing large quantities to ensure that it will perform satisfactorily.
Tray 1
Tray 1
Dimensions
Weight or thickness
Capacity
Paper and cardstock, standard sizes (letter/A4, legal, executive, JIS B5, A5); custom sizes
Range:
76 x 127 mm (3 x 5 inches) to 216 x 356 mm (8.5 x 14 inches)
Range:
60 g/m2 (16 lb) bond to 220 g/m2 (60 lb) bond
Maximum stack height: 10 mm (0.6 inch)
Equivalent to 100 sheets of 75 g/m2 (20 lb) bond
Glossy paper (letter/A4, legal, executive, JIS B5, A5)
NOTE: Do not use inkjet papers in this MFP.
Range:
76 x 127 mm (3 x 5 inches) to 216 x 356 mm (8.5 x 14 inches)
Range:
75 g/m2 (20 lb) bond to 220 g/m2 (60 lb) bond
Maximum stack height:
10 mm (0.6 inch)
Transparencies (letter/A4), suitable for use in laser printers
Letter: 216 x 279 mm (8.5 x 11 inches)
A4: 210 x 297 mm (8.27 x 11.7 inches)
Minimum 0.13 mm (0.005 inch) thick
Maximum stack height:
10 mm (0.6 inch)
HP Tough paper (letter/A4)
Letter: 216 x 279 mm (8.5 x 11 inches)
A4: 210 x 297 mm (8.27 x 11.7 inches)
0.13 mm (0.005 inch) thick
Maximum stack height: 10 mm (0.6 inch)
HP Color Laser Glossy Photo Paper (letter/A4)
NOTE: Do not use inkjet papers in this MFP.
Letter: 216 x 279 mm (8.5 x 11 inches)
A4: 210 x 297 mm (8.27 x 11.7 inches)
220 g/m2 (60 lb) bond
Maximum stack height: 10 mm (0.6 inch)
Envelopes (Com 10, Monarch, C5, DL, B5)
--
Range:
60 g/m2 (16 lb) bond to 90 g/ m2 (24 lb) bond
20 envelopes
Labels (letter/A4, legal, executive, JIS B5, A5), suitable for use in laser printers
Range:
76 x 127 mm (3 x 5 inches) to 216 x 356 mm (8.5 x 14 inches)
Maximum 0.23 mm (0.009 inch) thick
Maximum stack height:
10 mm (0.6 inch)
Tray 2, 3, and 41
Trays 2, 3, and 4
Dimensions
Weight or thickness
Capacity
Paper, standard sizes (letter/ A4, legal, executive, JIS B5, A5); custom sizes
Range:
148 x 210 mm (5.83 x 8.27 inches) to 216 x 356 mm (8.5 x 14 inches)
Range:
60 g/m2 (16 lb) bond to 120 g/m2 (32 lb) bond
Maximum stack height: 56 mm (2.2 inches)
Equivalent to 530 sheets of 75 g/m2 (20 lb) bond
Glossy paper (letter/A4, legal, executive, JIS B5, A5)
NOTE: Do not use inkjet papers in this MFP.
Range:
148 x 210 mm (5.83 x 8.27 inches) to 216 x 356 mm (8.5 x 14 inches)
Range:
75 g/m2 (20 lb) bond to 120 g/m2 (32 lb) bond
Maximum stack height:
56 mm (2.2 inches)
HP Color Laser Glossy Photo & Imaging Paper (letter/A4)
NOTE: Do not use inkjet papers in this MFP.
Letter: 216 x 279 mm (8.5 x 11 inches)
A4: 210 x 297 mm (8.27 x 11.7 inches)
120 g/m2 (32 lb) bond
Maximum stack height:
56 mm (2.2 inches)
Transparencies (letter/A4), suitable for use in laser printers
Letter: 216 x 279 mm (8.5 x 11 inches)
A4: 210 x 297 mm (8.27 x 11.7 inches)
Minimum:
0.13 mm (0.005 inches) thick
Maximum stack height:
56 mm (2.2 inches)
HP Tough Paper (letter/A4)
Letter: 216 x 279 mm (8.5 x 11 inches)
A4: 210 x 297 mm (8.27 x 11.7 inches)
Maximum:
0.13 mm (0.005 inches) thick
Maximum stack height:
56 mm (2.2 inches)
Labels (letter/A4 and custom sizes), suitable for use in laser printers
Range:
148 x 210 mm (5.83 x 8.27 inches) to 216 x 356 mm (8.5 x 14 inches)
Maximum:
0.13 mm (0.005 inch) thick
Maximum stack height:
56 mm (2.2 inches)
Note 1 Trays 2, 3, and 4 use custom sizes specifically for B5 ISO. These trays do not support the range of custom sizes that can be used in Tray 1.
Automatic duplex printing (two-sided printing)
Automatic duplex printing
Dimensions
Weight or thickness
Paper
Standard sizes:
  • Letter: 216 x 279 mm (8.5 x 11 inches)
  • A4: 210 x 297 mm (8.27 x 11.7 in)
  • 8.5 x 13: 216 x 330.2 mm (8.5 x 13 in)
  • Legal: 216 x 356 mm (8.5 x 14 inches)
  • Executive: 184.2 x 266.7 mm (7.25 x 10.5 in)
  • JIS B5: 182 x 257 mm (7.17 x 10.12 in)
Range:
60 g/m2 (16 lb) bond to 120 g/m2 (32 lb) bond
Glossy paper (A4/letter, 13 x 8.5 in, legal, executive, JIS B5)
NOTE: Do not use inkjet papers in this MFP.
See above row for standard sizes supported
Range:
75 g/m2 (20 lb) bond to 120 g/m2 (32 lb) bond
HP Color Laser Glossy Photo & Imaging Paper (A4/ letter)
NOTE: Do not use inkjet papers in this MFP.
Standard sizes:
  • Letter: 216 x 279 mm (8.5 x 11 inches)
  • A4: 210 x 297 mm (8.27 x 11.7 in)
120 g/m2 (32 lb) bond
Optional 3–bin mailbox or stacker
Size
Dimensions1
Weight
Capacity2
Letter
216 x 279 mm (8.5 x 11 inches)
  • For plain media: 60 g/m2 (16 lb) to 120 g/m2 (32 lb)
  • For thick media: 128 g/m2 (34 lb) to 199 g/m2 (53 lb)
  • For the stacker on the stapler/stacker or the lower bin on the 3–bin mailbox: 500 sheets of 75 g/m2 (20 lb) paper.
  • For the top two bins on the 3–bin mailbox: each can hold 100 sheets of 75 g/m2 (20 lb) paper.
A4
210 x 297 mm (8.27 x 11.7 in)
--
--
Executive
184.2 x 266.7 mm (7.25 x 10.5 in)
--
--
Legal
216 x 356 mm (8.5 x 14 inches)
--
--
B5 (JIS)
182 x 257 mm (7.17 x 10.12 in)
--
--
A5
148 x 210 mm (5.8 x 8.3 in)
--
--
Statement
140 x 216 mm (5.5 x 8.5 in)
--
--
8.5x13
216 x 330 mm (8.5 x 13 in)
--
--
Executive(JIS)
216 x 330 mm (8.5 x 13 in)
--
--
DPostcard(JIS)
148 x 200 mm (5.8 x 7.9 in)
--
--
16K
197 x 273 mm 197 x 273 mm (7.75 x 10.75 in)
--
--
Envelope #103
105 x 241 mm (4.1 x 9.5 in)
--
--
Envelope Monarch #7–3/43
98 x 191 mm (3.9 x 7.5 in)
--
--
Envelope C5 ISO3
162 x 229 mm (6.4 x 9.0 in)
--
--
Envelope DL ISO3
110 x 220 mm (4.3 x 8.7 in)
--
--
Envelope B5 ISO3
176 x 250 mm (6.7 x 9.8 in)
--
--
Custom
  • Minimum: 76 x 127 mm (3 x 5 in)
  • Maximum: 216 x 356 mm (8.5 x 14 in)
--
--
Cardstock, transparencies, and labels are supported only in the third bin of the 3– bin mailbox.
--
--
--
Note 1 The MFP supports a wide range of sizes. Check the MFP software for supported sizes.
Note 2 Capacity can vary depending on paper weight and thickness, as well as environmental conditions.
Note 3 Face-up delivery only.
Stapler part of the optional stapler/stacker
Size
Dimensions
Weight
Capacity
Letter
216 x 279 mm (8.5 x 11 inches)
  • For plain media: 60 g/m2 (16 lb) to 120 g/m2 (32 lb)
  • For thick media: 128 g/m2 (34 lb) to 199 g/m2 (53 lb)
  • For plain media: 30 sheets of 75 g/m2 (20 lb) paper.
  • For glossy media: 20 sheets
  • For thick media: the stack height must not exceed 7 mm (0.27 inches)
A4
210 x 297 mm (8.27 x 11.7 in)
--
--
Legal
216 x 356 mm (8.5 x 14 inches)
--
--
8.5x13
216 x 330 mm (8.5 x 13 in)
--
--
Executive(JIS)
216 x 330 mm (8.5 x 13 in)
--
--

top

Regulatory information

FCC compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. The end user of this product should be aware that any changes or modifications made to this equipment without the approval of Hewlett-Packard could result in the product not meeting the Class A limits, in which case the FCC could void the user's authority to operate the equipment.

NOTE: Any changes or modifications to the printer that are not expressly approved by HP could void the user’s authority to operate this equipment.

Telecom

Fax communications

This product is intended to be connected to the analog Public Switched Telecommunication Networks (PSTN) of European Economic Area (EEA) countries/regions. It meets requirements of EU R Directive 1999/5/EC (Annex II) and carries appropriate CE conformity marking.

However due to differences between individual national PSTNs the product may not guarantee unconditional assurance of successful operation on every PSTN termination point. Network compatibility depends on the correct setting being selected by the customer in preparation of its connection to the PSTN. Please follow the instructions provided in the user manual. If you experience network compatibility issues, please contact your equipment supplier or Hewlett-Packard help desk in the country/region of operation.

Connecting to a PSTN termination point may be the subject of additional requirements set out by the local PSTN operator.

top

Environmental Product Stewardship program

Hewlett-Packard Company is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment.

Ozone production

This product generates no appreciable ozone gas (O3 ).

Energy consumption

Energy Star

This product is designed to reduce power consumption and save natural resources without compromising product performance. It has been designed to reduce total energy consumption both during operation and when the device is not active.

This product qualifies for ENERGY STAR® , a voluntary program established by the U.S. Environmental Protection Agency (EPA) to encourage the development of energy-efficient office products.

Figure 10: ENERGY STAR® logo

ENERGY STAR® is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR® partner, HP has determined that this product meets ENERGY STAR® guidelines for energy efficiency.

To learn more about HP ENERGY STAR® qualified products, go to the Explore HP ENERGY STAR® qualified products Web site (www.hp.com/go/energystar) (in English).

For more information about ENERGY STAR® , go to the EPA's ENERGY STAR® Web site Non-HP site (www.energystar.gov) (in English).

top

Paper usage

This product's automatic duplex feature (two-sided printing) and n-up printing (multiple pages printed on one page) capabilities can reduce media usage and the resulting demands on natural resources.

Plastics

Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the product's life.

Printing supplies

It’s easy to return and recycle your empty HP LaserJet print cartridges—free of charge—with HP Planet Partners. HP is committed to providing inventive, high-quality products and services that are environmentally sound, from product design and manufacturing to distribution, operation and recycling processes. We ensure your returned HP LaserJet print cartridges are recycled properly, processing them to recover valuable plastics and metals for new products and diverting millions of tons of waste from landfills. Since this cartridge is being recycled and used in new materials, it will not be returned to you. Your empty HP LaserJet print cartridges are recycled responsibly when you participate in the HP Planet Partners program. Thank you for being environmentally responsible!

In many countries/regions, this product’s printing supplies (print cartridges, fuser, and transfer unit) can be returned to HP through the HP Printing Supplies Returns and Recycling Program. An easy-touse and free takeback program is available in over 35 countries/regions. Multilingual program information and instructions are included in every new HP LaserJet print cartridge and supplies package.

HP Printing Supplies Returns and Recycling program

Since 1992, HP has offered HP LaserJet supplies return and recycling free of charge. In 2004, HP Planet Partners for LaserJet Supplies was available in 85% of the world market where HP LaserJet supplies are sold. Postage-paid and pre-addressed labels are included within the instruction guide in most HP LaserJet print cartridge boxes. Labels and bulk boxes are also available through the Web site at the following URL: http://www.hp.com/recycle .

Use the label to return empty, original HP LaserJet print cartridges only. Please do not use this label for, non-HP cartridges, refilled or remanufactured cartridges or warranty returns. Printing supplies or other objects inadvertently sent to the HP Planet Partners program cannot be returned.

More than 10 million HP LaserJet print cartridges were recycled globally in 2004 through the HP Planet Partners supplies recycling program. This record number represents 26 million pounds of print cartridge materials diverted from landfills. Worldwide, in 2004, HP recycled an average of 59% of the print cartridge by weight consisting primarily of plastic and metals. Plastics and metals are used to make new products such as HP products, plastic trays and spools. The remaining materials are disposed of in an environmentally responsible manner.

U.S. returns

For a more environmentally responsible return of used cartridges and supplies, HP encourages the use of bulk returns. Simply bundle two or more cartridges together and use the single, pre-paid, and pre-addressed UPS label that is supplied in the package. For more information in the U.S., call 1-800-340-2445 or visit the HP Web site at the following URL: http://www.hp.com/recycle .

Non-U.S. returns

Non-U.S. customers should visit the http://www.hp.com/recycle Web site for further information regarding availability of the HP Supplies Returns and Recycling Program.

top

Recycled paper

This product is capable of using recycled papers according to EN 12281:2002. HP recommends the use of recycled papers that contain not more than 5% ground wood, such as HP Office Recycled paper.

Material restrictions

  • This HP product contains mercury in the fluorescent lamp of the control panel liquid crystal display that might require special handling at end-of-life.

  • This HP product contains the following battery type that may require special handling at end-of-life:

    Type
    Carbon monofluoride lithium battery
    Weight
    0.8 grams
    Location
    Formatter board
    User removable
    No

For recycling information, visit the following URL: http://www.hp.com/go/recycle or contact your local authorities or the Electronics Industry Alliance at the following URL: http://www.eiae.org Non-HP site .

Disposal of waste equipment by users in private households in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Material Safety Data Sheet (MSDS)

To obtain Material Safety Data Sheets (MSDS), or to learn about supplies containing chemical substances (toner, for example), go to www.hp.com/go/msds .

For more information

Go to www.hp.com/go/environment for more information, or to learn more about the following environmental topics:

  • Product environmental profile sheet for this and many related HP products.
  • HP's commitment to the environment
  • HP's environmental management system
  • HP's end-of-life product return and recycling program
  • Material Safety Data Sheets (MSDS)

top

Declaration of conformity

HP Color LaserJet 4730mfp
Declaration of conformity
according to ISO/IEC Guide 22 and EN 45014:
Manufacturer's Name:
Hewlett-Packard Company
Manufacturer's Address:
11311 Chinden Boulevard, Boise, Idaho 83714-1021, USA
declares that the product:
Product Name:
HP Color LaserJet 4730 MFP, 4730x MFP, 4730xs MFP, 4730xm MFP
Product Numbers:
Q7517A, Q7518A, Q7519A, Q7520A
Including accessories: Q7521A, Q7522A, Q7523A, BOISB-0308-00
Regulatory Model Number:
BOISB-0503-004 )
Product Options:
ALL
Toner Cartridge: Q6460A, Q6461A, Q6462A, Q6463A
conforms to the following Product Specifications:
Safety:
  • IEC 60950-1:2001 / EN60950-1: 2001
  • IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 +A11 +A2 (Class 1 Laser/LED Product)
  • GB4943-2001
EMC:
  • CISPR 22:1997 / EN 55022:1998 - Class A1 )
  • EN 61000-3-2:2000
  • EN 61000-3-3:1995 + A1:2001
  • EN 55024:1998+A1:2001
  • FCC Title 47 CFR, Part 15 Class A / ICES-003, Issue 42 )
  • GB9254-1998
TELECOM:
TBR-21:1998; EG 201 121:1998
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, the R&TTE Directive 1999/5/EC (Annex II) and carries the CE-Marking accordingly.
  1. The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems. Compliance testing of product to standard with exception of Clause 9.5, which is not yet in effect.

  2. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

    1. This device may not cause harmful interference, and
    2. This device must accept any interference received, including interference that may cause undesired operation.
  3. For regulatory purposes, this product is assigned a Regulatory model number (BOISB-0503-00). This number should not be confused with the product name or the product number(s).

  4. All worldwide modular approvals for analog fax accessory obtained by Hewlett-Packard under the regulatory model number BOISB-0308–00 incorporate the Multi-Tech Systems MT5634SMI Socket Modem Module.

Boise, Idaho, USA; 21 December 2004
For regulatory topics ONLY, contact:
Australia:
Product Regulations Manager
Hewlett-Packard Australia Ltd.
31-41 Joseph Street
Blackburn, Victoria 3130, Australia
Europe:
Your Local Hewlett-Packard Sales and Service Office
- OR -
Hewlett-Packard GmbH
Department HQ-TRE / Standards Europe
Herrenberger Straße 140, Böblingen D-71034, Germany
(FAX: +49-7031-14-3143)
USA:
Product Regulations Manager
Hewlett-Packard Company
PO Box 15, Mail Stop 160
Boise, Idaho 83707-0015, USA
(Phone: 208-396-6000)

Country-/region-specific safety statements

Laser safety statement (USA)

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The printer is certified as a "Class 1" laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968.

Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation.

WARNING: Using controls, making adjustments, or performing procedures other than those specified in this user guide may result in exposure to hazardous radiation.

Laser safety statement (Finland)

LASERTURVALLISUUS

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

HP LaserJet 4370mfp, HP LaserJet 4730x mfp, HP LaserJet 4730xs mfp, HP LaserJet 4730xm mfp -laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle.

Laitteen turvallisuusluokka on määritetty standardin EN60825-1 (1994) mukaisesti.

VAROITUS!

Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.

VARNING!

Om apparaten används på annat sätt än i bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.

HUOLTO

HP LaserJet 4370mfp, HP LaserJet 4730x mfp, HP LaserJet 4730xs mfp, HP LaserJet 4730xm mfp -kirjoittimen sisällä ei ole käyttäjän huollettavissa olevia kohteita. Laitteen saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, paperiradan puhdistusta tai muita käyttäjän käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja ylläpitotoimia, jotka voidaan suorittaa ilman erikoistyökaluja.

VARO!

Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömälle lasersäteilylle laitteen ollessa toiminnassa. Älä katso säteeseen.

VARNING!

Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för osynlig laserstrålning. Betrakta ej strålen.

Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista:

  • Aallonpituus 770-800 nm
  • Teho 5 mW
  • Luokan 3B laser

DOC statement (Canada)

Complies with Canadian EMC Class A requirements.

Conforme à la classe A des normes canadiennes de compatibilité électromagnétiques (CEM).

Power cord statement (Japan)

VCCI statement (Japan)

EMI statement (Korea)

Safety statement (Taiwan)

Australia

This equipment complies with Australian EMC requirements.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!