|| Rate this content|
Printer Specifications for HP LaserJet Pro P1566 and P1606dn Printers
Review the following sections for product-specific information.
Models and part numbers
Windows system requirements
Macintosh system requirements
Visit HP SureSupply to check ink cartridge compatibility or purchase replacement ink cartridges.
Genuine HP ink cartridges can also be purchased from other retailers.
The following tables contain specifications for supported paper.
NOTE: Capacity can vary depending on paper weight and thickness, and environmental conditions.
Paper types and sizes
NOTE: The product supports a wide range of standard and custom sizes of paper. Check the printer driver for supported sizes.
The following tables contain the power specifications for the product.
CAUTION: Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. Doing so might damage the printer and void the product warranty.
Power consumption (average in watts)1
1 The power consumption reflects the highest values measured for monochrome printing when using standard voltages.
The following information contains the environmental specifications for the product.
Recommended operating conditions
This product is designed to reduce power consumption and save natural resources without compromising product performance. It has been designed to reduce total energy consumption both during operation and when the device is not active. This product qualifies for ENERGY STAR®, which is a voluntary program established to encourage the development of energy-efficient office products.
Figure 3: Energy Star logo
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner, HP has determined that this product meets ENERGY STAR guidelines for energy efficiency.
For more information, go to the Energy Star Web site (in English).
Materials safety data sheets
To view Material Safety Data Sheets (MSDS), go to http://www.hp.com/go/msds (in English).
This product generates no appreciable ozone gas (O3 ).
Paper and plastic use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002. Plastic parts over 25 grams (0.88 ounces) are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of product life.
Print cartridge recycling
Multilingual program information and instructions are included in every new HP LaserJet print cartridge and supplies package.
HP offers an increasing number of product return and recycling programs in many countries and regions, and partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by reselling some of its most popular products. For more information about the recycling of HP products, go to www.hp.com/hpinfo/globalcitizenship/environment/recycle/ (in English).
The following information contains some of the regulatory specifications for the product.
Exposure to radio frequency radiation
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The device is certified as a “Class 1” laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. Since radiation emitted inside the device is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation.
WARNING: Using controls, making adjustments, or performing procedures other than those specified in this user guide might result in exposure to hazardous radiation.
Regulatory model identification number