Loading Paper and Envelopes for the HP LaserJet Pro CM1415fn and CM1415fnw Color Multifunction Printers
This document describes how to load paper and envelopes into tray 1. Use tray 1 to print up to 10 envelopes or up to 150 sheets paper.
Follow these steps to load paper in the product:
Open tray 1.
Figure 1: Open tray 1
Slide the paper guides to their outermost positions.
Figure 2: Slide out the paper guides
Insert paper into tray 1 with the top edge at the back of tray and the print side facing up.
Figure 3: Load paper into tray 1
Slide the paper guides inward to fit snugly against the paper.
Figure 4: Slide in the paper guides
- Close tray 1.
Figure 5: Close tray 1
Before loading and printing on envelopes, review the following guidelines.
Use envelopes recommended only for laser printers.
Use envelopes with peel-off adhesive strips that are approved for use in laser printers.
Use envelopes with seams extending to the corners.
Figure 6: Envelopes with acceptable and unacceptable seams
1 - Acceptable
2 - Unacceptable
Do not use envelopes with clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic materials that are susceptible to heat.
Do not use envelopes that are wrinkled, nicked, stuck together, or otherwise damaged.
Do not use self-stick adhesives or other synthetic materials.
Follow these steps to load envelopes in the product:
Open tray 1.
Figure 7: Open tray 1
- Slide out the paper guides.
Figure 8: Slide out the paper guides
- Load envelopes with the print side facing up and the stamp end toward the back of the tray.
Figure 9: Load envelopes this way
Slide in the paper guides to fit snugly against the envelopes.
Insert the paper tray into the product.