Print | Rate this content

Replacement Printer Instructions for HP Deskjet Ink Advantage 2060 All-in-One Printer Series

When HP replaces your defective product, some accessories or parts need to be transferred from the defective product to the replacement product.

  • Some optional accessories might not be included with your product model.
  • Keep any optional accessories that you bought separately.

See below the list of HP Deskjet Ink Advantage 2060 All-in-One K110 Series models which this document applies to:

Model name
Product code
HP Deskjet Ink Advantage 2060 AiO Printer K110a


  1. Prior to replacing or disposing of your defective unit, follow these instructions to ensure the right accessories are removed:

    1. Print cartridges. Make sure that the unit is plugged in and turned on before removing the print cartridges.

      NOTE: If the cartridges are not going to be inserted in the replacement product immediately, please store them at room temperature inside a rigid sealed plastic container. Store the color cartridge with the nozzles DOWN and the black cartridge with the nozzles UP. This will help prevent ink from drying out.
      1. Open the print cartridges door. The print carriage will move to the center of the device.

      2. Wait until the print carriage is idle and silent, then lightly press down on an ink cartridge to release it. Pull the ink cartridge out of its slot.

      3. Repeat Step 2 for the other ink cartridge and close the print cartridges door.

      Unplug the printer and keep the following accessories:

    2. Power cord

    3. Power supply module

    4. USB (Universal Serial Bus) cord

    5. Manuals and CD-ROM

  2. Transfer the accessories mentioned above from your defective unit to the replacement product.

  3. Apply power to the replacement product and test all the product functions.

  4. For additional support information for your HP product, please visit .

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!