Print | Rate this content

HP ProLiant BL465c G7 Server - Replacing Memory

Removing memory

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.
CAUTION: Always wear an antistatic wrist strap when working inside the server.
  1. Power down the server blade.

  2. Remove the server blade.

  3. Remove the access panel.

  4. Disconnect the cables.

  5. Remove the DIMM baffle.

  6. Remove the DIMM.

top

Installing memory

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.
CAUTION: Always wear an antistatic wrist strap when working inside the server.
  1. Power down the server blade.

  2. Remove the server blade.

  3. Remove the access panel.

  4. Disconnect the cables, and then remove the DIMM baffle.

  5. Open the DIMM slot latches.

  6. Install the DIMM baffle.

  7. Connect the hard drive cables.

  8. Connect the cache module capacitor cable.

  9. Install the access panel.

  10. Install the server blade.

top

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!