Print | Rate this content

HP LaserJet Enterprise P3015 Printer Series - Replace the HP Jetdirect Print Server Card

To view a video demonstrating the procedure for removing the part click here to access the Services Media Library (www.hp.com/go/sml). Select Printers and Multifunction under the Product category, select HP Color LaserJet Printers under the Product family, and then select the printer model under the product series category.

HP Jetdirect print server card replacement

  1. Turn off the product.

  2. Disconnect any cables from the EIO card.

  3. Remove the two screws and cover plate from the EIO slot on the back of the product.

  4. Remove the EIO card from the EIO slot.

  5. Install the new EIO card in the EIO slot and tighten the screws.

  6. If the EIO card requires a cable connection, connect the cable.

  7. Turn on the product, and then print a configuration page to verify that the new EIO card is recognized.

    NOTE: When you print a configuration page, an HP Jetdirect configuration page that contains network configuration and status information also prints.

top

Parts return

If your part requires return then click on the appropriate link below:

Click here for the defective parts return procedure for US .

Click here for the defective parts return procedure for Europe .

top

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!