Printable version

Drivers & software

Important Note Not the product you are looking for? If you cannot find your product on this site, go to HP Support Center - Hewlett Packard Enterprise .

NextWindow Voltron Touch Screen Driver

By downloading, you agree to the terms and conditions of the HP Software License Agreement.
Note: Some software requires a valid warranty, current HP support contract, or a license fee.

Type: Driver - Keyboard, Mouse and Input Devices
Version: 3.1.6.0.a Rev. A(19 Aug 2011)
Operating System(s): Microsoft Windows 7 Professional (32-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
File name: sp54080.exe (3.5 MB)
NextWindow Voltron Touch Screen for Nisene Windows 7 support for HP TouchSmart 7320 PC All-in-One.
1. Follow the on-screen instructions to unzip the SoftPaq.
2. After unzipping the SoftPaq, go to Device Manager and you will see a Touchscreen device or if you are updating from a previous driver to this driver, locate NextWindow Voltron Touch Screen under Human Interface Devices.
4. In the Touchscreen/NextWindow Voltron Touch Screen Properties page, click the Detail tab, click on the drop down menu, and then select hardware IDs.
5. Copy down the hardware ID, and then click OK on the properties page.
6. Go to Unversial Serial bus Controllers, then look through USB Composite Devices that has the same hardware ID from the touch screen.
7. After locating the same hardware ID device, click on Driver tab, and then click on Update Driver.
8. Select Browse my computer for driver software then navigate to the driver folder where you unzip the SoftPaq.
9. Follow the on-screen instruction to install the driver.
10. After the driver is installed, reboot the system.
At least Windows 7 Home Premium must be installed prior to this driver installation.
TITLE: NextWindow Voltron Touch Screen Driver

VERSION: 3.1.6.0.a Rev. A
DESCRIPTION:
NextWindow Voltron Touch Screen for Nisene 

Windows 7 support for HP TouchSmart 7320 PC All-in-One. 

PURPOSE: Routine
SOFTPAQ NUMBER: SP54080
SUPERSEDES: None
EFFECTIVE DATE: August 19, 2011
CATEGORY: Driver - Keyboard, Mouse and Input Devices
SSM SUPPORTED: No

PRODUCT TYPE(S):
Desktops

HARDWARE PRODUCT MODEL(S):
HP TouchSmart Elite 7320 PC: HP TouchSmart 7320 PC All-in-One.

SOFTWARE PRODUCT(S):
None

DEVICES SUPPORTED:
NextWindow Voltron Touch Screen (21.5")

OPERATING SYSTEM(S): 
Microsoft Windows 7 32-bit
Microsoft Windows 7 32-bit Professional
Microsoft Windows 7 64-bit
Microsoft Windows 7 64-bit Home Premium
Microsoft Windows 7 64-bit Professional

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

PREREQUISITES: 
At least Windows 7 Home Premium must be installed prior to this driver 
installation.

INSTALLATION INSTRUCTIONS: 
1. Follow the on-screen instructions to unzip the SoftPaq.
2. After unzipping the SoftPaq, go to Device Manager and you will see a 
Touchscreen device or if you are updating from a previous driver to this 
driver, locate NextWindow Voltron Touch Screen under Human Interface Devices.
4. In the Touchscreen/NextWindow Voltron Touch Screen Properties page, click 
the Detail tab, click on the drop down menu, and then select hardware IDs.
5. Copy down the hardware ID, and then click OK on the properties page.
6. Go to Unversial Serial bus Controllers, then look through USB Composite 
Devices that has the same hardware ID from the touch screen.
7. After locating the same hardware ID device, click on Driver tab, and then 
click on Update Driver.
8. Select Browse my computer for driver software then navigate to the driver 
folder where you unzip the SoftPaq.
9. Follow the on-screen instruction to install the driver.
10. After the driver is installed, reboot the system.


Copyright (c) 2011 Hewlett-Packard Development Company, L.P.

Version:3.1.6.0.a Rev. A (19 Aug 2011)

Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts.
Type: Driver - Keyboard, Mouse and Input Devices
Version: 3.1.6.0.a Rev. A(19 Aug 2011)
Operating System(s):
Microsoft Windows 7 Professional (32-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)

Description

NextWindow Voltron Touch Screen for Nisene Windows 7 support for HP TouchSmart 7320 PC All-in-One.

Installation Instructions

1. Follow the on-screen instructions to unzip the SoftPaq.
2. After unzipping the SoftPaq, go to Device Manager and you will see a Touchscreen device or if you are updating from a previous driver to this driver, locate NextWindow Voltron Touch Screen under Human Interface Devices.
4. In the Touchscreen/NextWindow Voltron Touch Screen Properties page, click the Detail tab, click on the drop down menu, and then select hardware IDs.
5. Copy down the hardware ID, and then click OK on the properties page.
6. Go to Unversial Serial bus Controllers, then look through USB Composite Devices that has the same hardware ID from the touch screen.
7. After locating the same hardware ID device, click on Driver tab, and then click on Update Driver.
8. Select Browse my computer for driver software then navigate to the driver folder where you unzip the SoftPaq.
9. Follow the on-screen instruction to install the driver.
10. After the driver is installed, reboot the system.

System Requirements

At least Windows 7 Home Premium must be installed prior to this driver installation.

Release Notes

TITLE: NextWindow Voltron Touch Screen Driver

VERSION: 3.1.6.0.a Rev. A
DESCRIPTION:
NextWindow Voltron Touch Screen for Nisene 

Windows 7 support for HP TouchSmart 7320 PC All-in-One. 

PURPOSE: Routine
SOFTPAQ NUMBER: SP54080
SUPERSEDES: None
EFFECTIVE DATE: August 19, 2011
CATEGORY: Driver - Keyboard, Mouse and Input Devices
SSM SUPPORTED: No

PRODUCT TYPE(S):
Desktops

HARDWARE PRODUCT MODEL(S):
HP TouchSmart Elite 7320 PC: HP TouchSmart 7320 PC All-in-One.

SOFTWARE PRODUCT(S):
None

DEVICES SUPPORTED:
NextWindow Voltron Touch Screen (21.5")

OPERATING SYSTEM(S): 
Microsoft Windows 7 32-bit
Microsoft Windows 7 32-bit Professional
Microsoft Windows 7 64-bit
Microsoft Windows 7 64-bit Home Premium
Microsoft Windows 7 64-bit Professional

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

PREREQUISITES: 
At least Windows 7 Home Premium must be installed prior to this driver 
installation.

INSTALLATION INSTRUCTIONS: 
1. Follow the on-screen instructions to unzip the SoftPaq.
2. After unzipping the SoftPaq, go to Device Manager and you will see a 
Touchscreen device or if you are updating from a previous driver to this 
driver, locate NextWindow Voltron Touch Screen under Human Interface Devices.
4. In the Touchscreen/NextWindow Voltron Touch Screen Properties page, click 
the Detail tab, click on the drop down menu, and then select hardware IDs.
5. Copy down the hardware ID, and then click OK on the properties page.
6. Go to Unversial Serial bus Controllers, then look through USB Composite 
Devices that has the same hardware ID from the touch screen.
7. After locating the same hardware ID device, click on Driver tab, and then 
click on Update Driver.
8. Select Browse my computer for driver software then navigate to the driver 
folder where you unzip the SoftPaq.
9. Follow the on-screen instruction to install the driver.
10. After the driver is installed, reboot the system.


Copyright (c) 2011 Hewlett-Packard Development Company, L.P.

Revision History

Version:3.1.6.0.a Rev. A (19 Aug 2011)