Printable version

Drivers & software

Important Note Not the product you are looking for? If you cannot find your product on this site, go to HP Support Center - Hewlett Packard Enterprise .

ROM Image for Evo D310/D320/D510 and W4000 SFF DDR (686O2 ROM)

By downloading, you agree to the terms and conditions of the HP Software License Agreement.
Note:  Some software requires a valid warranty, current HP support contract, or a license fee.

Type: BIOS
Version: 3.18(12 Jun 2003)
Operating System(s): Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Microsoft Windows 2000
File name: sp23347.exe (633 KB)
This SoftPaq creates files that contain a binary image for the System ROM for the Evo Models with a 686O2 Family ROM. This SoftPaq is used to flash the System ROM on target PCs on a network, and it requires System Software Manager (SSM) or Remote Management Setup. For Evo D310, D320, and W4000 SFF DDR models, this release is being implemented in the factory and will be shipped on new computers. For D510 models, this update will not be implemented in the factory and is made available on the web only, as a maintenance release for Evo D510 customers that may be interested in the fixes or enhancements made available in this version. The ROM Family and ROM date can be determined by running the Setup Utility by pressing F10 on the target computer during system power on of the computer, and viewing File/System Information. This information can be saved into a text file by selecting File/Save to Diskette. See important installation note below in HOW TO USE section.
  • Adds microcode update for Intel Pentium 4, D1 processors.
HOW TO USE: IMPORTANT NOTE: If the target system is configured with a 3.06-GHz processor and a 3.xx ROM earlier than version 3.16, Hyper-Threading must be disabled before updating the BIOS using Windows-based flash tools, HPQFlash or SSM. Otherwise, BIOS data integrity problems can occur. By default, Hyper-Threading is disabled in F10 setup. To disable Hyper-Threading follow these steps:
    a) At the COMPAQ BIOS startup screen, press F10 when prompted. The prompt will appear in the lower right hand corner of the COMPAQ splash screen. b) Choose your preferred language. c) From the Advanced menu, select Device Options. d) In the Device Options sub-menu, set the Hyper-Threading option to Disable.
  1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
  2. Refer to the remote utility documentation for instructions on creating a Remote ROM Flash job to flash the System ROM on target PCs on the network. WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE UPGRADE PROCESS!!!

Prerequisites

  • System Software Manager (SSM) or Remote Management Setup

TITLE:
ROM Image for Evo D310/D320/D510 and W4000 SFF DDR (686O2 ROM)
VERSION:
3.18
DESCRIPTION:
This SoftPaq creates files that contain a binary image for the System ROM forthe Evo Models with a 686O2 Family ROM. This SoftPaq is used to flash the SystemROM on target PCs on a network, and it requires System Software Manager (SSM) or RemoteManagement Setup.For Evo D310, D320, and W4000 SFF DDR models, this release is being implemented in the factory and will be shipped on new computers. For D510 models, this update will not be implemented in the factory and is made available on the web only, as a maintenance release for Evo D510 customers that may be interested in the fixes or enhancements made available in this version.The ROM Family and ROM date can be determined by running the Setup Utility bypressing F10 on the target computer during system power on of the computer,and viewing File/System Information. This information can be saved into a text file by selecting File/Save to Diskette.See important installation note below in HOW TO USE section.IMPORTANT NOTE:If you use System Software Manager (SSM) to deploy SoftPaqs within your organization, you must upgrade to SSM version 1.50 Rev. B or greater, which supports all new and existing SoftPaq formats. For information on SSM, check this web page -- http://www.compaq.com/im/change/ssmwp.html

PURPOSE:
Recommended
SOFTPAQ NUMBER:
SP23347
SUPERSEDES:
SP23341
EFFECTIVE DATE:
June 12, 2003
CATEGORY:
BIOS
SSM SUPPORTED:
Yes
PRODUCT TYPE(S):
Desktops
Workstations
PRODUCT MODEL(S):
Evo D310 Microtower: All Models
Evo D310 Desktop: All Models
Evo D310 Slim Tower: All Models
Evo D310v: All Models
Evo D320: All Models
Evo D510 Convertible Minitower: All Models
Evo D510 Small Form Factor: All Models
Evo Workstation W4000 Small Form Factor DDR: All Models
OPERATING SYSTEM(S):
Microsoft Windows XP Professional
Microsoft Windows XP Home
Microsoft Windows 2000
ROMPaqs/BIOS and Firmware
LANGUAGE(S):
Global
PREREQUISITES:
System Software Manager (SSM) or Remote Management Setup

ENHANCEMENTS:
- Adds microcode update for Intel Pentium 4, D1 processors.
FIXES:
- Fixes issue where IDE devices could be inadvertently set to slower transfer modes in
Windows systems with certain drive configurations.
- Fixes an extremely rare condition that could prevent the time and date from being set
in F10 setup when certain languages are selected.

HOW TO USE:
IMPORTANT NOTE: If the target system is configured with a 3.06-GHz processor and a 3.xx ROM
earlier than version 3.16, Hyper-Threading must be disabled before updating the
BIOS using Windows-based flash tools, HPQFlash or SSM. Otherwise, BIOS data
integrity problems can occur. By default, Hyper-Threading is disabled
in F10 setup. To disable Hyper-Threading follow these steps:

a) At the COMPAQ BIOS startup screen, press F10 when prompted. The prompt will
appear in the lower right hand corner of the COMPAQ splash screen.
b) Choose your preferred language.
c) From the Advanced menu, select Device Options.
d) In the Device Options sub-menu, set the Hyper-Threading option to Disable.

1. Download the SoftPaq to a directory on your hard drive. The file
downloaded is a self-extracting executable with a filename based on the
SoftPaq Number above.

2. Refer to the remote utility documentation for instructions on creating a
Remote ROM Flash job to flash the System ROM on target PCs on the network.

WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE UPGRADE PROCESS!!!

Copyright (c) 2003 Hewlett-Packard Development Company, L.P.
  • Fixes issue where IDE devices could be inadvertently set to slower transfer modes in Windows systems with certain drive configurations.
  • Fixes an extremely rare condition that could prevent the time and date from being set in F10 setup when certain languages are selected.
Version:3.18 (12 Jun 2003)
Fixes
  • Fixes issue where IDE devices could be inadvertently set to slower transfer modes in Windows systems with certain drive configurations.
  • Fixes an extremely rare condition that could prevent the time and date from being set in F10 setup when certain languages are selected.
Enhancements
  • Adds microcode update for Intel Pentium 4, D1 processors.

Version:3.16 A (10 Apr 2003)
Fixes
  • Corrects possible system reboot and possible BIOS integrity problem on systems with 3.06-GHz processors when using Windows-based flash tools, CPQFlash or SSM, when Hyper-Threading is enabled. By default, Hyper-Threading is disabled in F10 Setup. Systems with Hyper-Threading disabled, or processors slower the 3.06-GHz, will not see this issue.
Enhancements
  • Adds microcode update for Intel Pentium 4, D1 processors.
  • Restructures Hyper-Threading code to allow for more option ROM space.
  • Updates Intel Video BIOS to version 2882.


Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts.
Type: BIOS
Version: 3.18(12 Jun 2003)
Operating System(s):
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Microsoft Windows 2000

Description

This SoftPaq creates files that contain a binary image for the System ROM for the Evo Models with a 686O2 Family ROM. This SoftPaq is used to flash the System ROM on target PCs on a network, and it requires System Software Manager (SSM) or Remote Management Setup. For Evo D310, D320, and W4000 SFF DDR models, this release is being implemented in the factory and will be shipped on new computers. For D510 models, this update will not be implemented in the factory and is made available on the web only, as a maintenance release for Evo D510 customers that may be interested in the fixes or enhancements made available in this version. The ROM Family and ROM date can be determined by running the Setup Utility by pressing F10 on the target computer during system power on of the computer, and viewing File/System Information. This information can be saved into a text file by selecting File/Save to Diskette. See important installation note below in HOW TO USE section.

Enhancements

  • Adds microcode update for Intel Pentium 4, D1 processors.

Installation Instructions

HOW TO USE: IMPORTANT NOTE: If the target system is configured with a 3.06-GHz processor and a 3.xx ROM earlier than version 3.16, Hyper-Threading must be disabled before updating the BIOS using Windows-based flash tools, HPQFlash or SSM. Otherwise, BIOS data integrity problems can occur. By default, Hyper-Threading is disabled in F10 setup. To disable Hyper-Threading follow these steps:
    a) At the COMPAQ BIOS startup screen, press F10 when prompted. The prompt will appear in the lower right hand corner of the COMPAQ splash screen. b) Choose your preferred language. c) From the Advanced menu, select Device Options. d) In the Device Options sub-menu, set the Hyper-Threading option to Disable.
  1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
  2. Refer to the remote utility documentation for instructions on creating a Remote ROM Flash job to flash the System ROM on target PCs on the network. WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE UPGRADE PROCESS!!!

System Requirements

Prerequisites

  • System Software Manager (SSM) or Remote Management Setup

Release Notes

TITLE:
ROM Image for Evo D310/D320/D510 and W4000 SFF DDR (686O2 ROM)
VERSION:
3.18
DESCRIPTION:
This SoftPaq creates files that contain a binary image for the System ROM forthe Evo Models with a 686O2 Family ROM. This SoftPaq is used to flash the SystemROM on target PCs on a network, and it requires System Software Manager (SSM) or RemoteManagement Setup.For Evo D310, D320, and W4000 SFF DDR models, this release is being implemented in the factory and will be shipped on new computers. For D510 models, this update will not be implemented in the factory and is made available on the web only, as a maintenance release for Evo D510 customers that may be interested in the fixes or enhancements made available in this version.The ROM Family and ROM date can be determined by running the Setup Utility bypressing F10 on the target computer during system power on of the computer,and viewing File/System Information. This information can be saved into a text file by selecting File/Save to Diskette.See important installation note below in HOW TO USE section.IMPORTANT NOTE:If you use System Software Manager (SSM) to deploy SoftPaqs within your organization, you must upgrade to SSM version 1.50 Rev. B or greater, which supports all new and existing SoftPaq formats. For information on SSM, check this web page -- http://www.compaq.com/im/change/ssmwp.html

PURPOSE:
Recommended
SOFTPAQ NUMBER:
SP23347
SUPERSEDES:
SP23341
EFFECTIVE DATE:
June 12, 2003
CATEGORY:
BIOS
SSM SUPPORTED:
Yes
PRODUCT TYPE(S):
Desktops
Workstations
PRODUCT MODEL(S):
Evo D310 Microtower: All Models
Evo D310 Desktop: All Models
Evo D310 Slim Tower: All Models
Evo D310v: All Models
Evo D320: All Models
Evo D510 Convertible Minitower: All Models
Evo D510 Small Form Factor: All Models
Evo Workstation W4000 Small Form Factor DDR: All Models
OPERATING SYSTEM(S):
Microsoft Windows XP Professional
Microsoft Windows XP Home
Microsoft Windows 2000
ROMPaqs/BIOS and Firmware
LANGUAGE(S):
Global
PREREQUISITES:
System Software Manager (SSM) or Remote Management Setup

ENHANCEMENTS:
- Adds microcode update for Intel Pentium 4, D1 processors.
FIXES:
- Fixes issue where IDE devices could be inadvertently set to slower transfer modes in
Windows systems with certain drive configurations.
- Fixes an extremely rare condition that could prevent the time and date from being set
in F10 setup when certain languages are selected.

HOW TO USE:
IMPORTANT NOTE: If the target system is configured with a 3.06-GHz processor and a 3.xx ROM
earlier than version 3.16, Hyper-Threading must be disabled before updating the
BIOS using Windows-based flash tools, HPQFlash or SSM. Otherwise, BIOS data
integrity problems can occur. By default, Hyper-Threading is disabled
in F10 setup. To disable Hyper-Threading follow these steps:

a) At the COMPAQ BIOS startup screen, press F10 when prompted. The prompt will
appear in the lower right hand corner of the COMPAQ splash screen.
b) Choose your preferred language.
c) From the Advanced menu, select Device Options.
d) In the Device Options sub-menu, set the Hyper-Threading option to Disable.

1. Download the SoftPaq to a directory on your hard drive. The file
downloaded is a self-extracting executable with a filename based on the
SoftPaq Number above.

2. Refer to the remote utility documentation for instructions on creating a
Remote ROM Flash job to flash the System ROM on target PCs on the network.

WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE UPGRADE PROCESS!!!

Copyright (c) 2003 Hewlett-Packard Development Company, L.P.

Fixes

  • Fixes issue where IDE devices could be inadvertently set to slower transfer modes in Windows systems with certain drive configurations.
  • Fixes an extremely rare condition that could prevent the time and date from being set in F10 setup when certain languages are selected.

Revision History

Version:3.18 (12 Jun 2003)
Fixes
  • Fixes issue where IDE devices could be inadvertently set to slower transfer modes in Windows systems with certain drive configurations.
  • Fixes an extremely rare condition that could prevent the time and date from being set in F10 setup when certain languages are selected.
Enhancements
  • Adds microcode update for Intel Pentium 4, D1 processors.

Version:3.16 A (10 Apr 2003)
Fixes
  • Corrects possible system reboot and possible BIOS integrity problem on systems with 3.06-GHz processors when using Windows-based flash tools, CPQFlash or SSM, when Hyper-Threading is enabled. By default, Hyper-Threading is disabled in F10 Setup. Systems with Hyper-Threading disabled, or processors slower the 3.06-GHz, will not see this issue.
Enhancements
  • Adds microcode update for Intel Pentium 4, D1 processors.
  • Restructures Hyper-Threading code to allow for more option ROM space.
  • Updates Intel Video BIOS to version 2882.