Printable version

Drivers & software

Important Note Not the product you are looking for? If you cannot find your product on this site, go to HP Support Center - Hewlett Packard Enterprise .

LSI SAS 2308/9212-4i Driver for Microsoft Windows 7 (64-bit Editions)

By downloading, you agree to the terms and conditions of the HP Software License Agreement.
Note:  Some software requires a valid warranty, current HP support contract, or a license fee.

Type: Driver - Storage
Version: 2.00.51.02 Rev. A(15 Apr 2014)
Operating System(s): Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Enterprise (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
File name: sp56513.exe (937 KB)
This package contains the LSI Serial Attached SCSI (SAS) Driver for supported workstations running a supported operating system.
- Provides an updated driver release from LSI.
1. Download the file by clicking the "Download" or "Obtain Software" button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions. Note the location where the SoftPaq contents are extracted (the default is C:\SWSETUP\SPxxxxx).

NOTE: After the files have been unpacked, the file downloaded in Step 1 can be deleted, if desired.

UPDATING THE DRIVER
To update the driver, complete the following steps:

1. Open Device Manager (click Control Panel, then click System, then click Hardware, and then click Device Manager).

2. Click the plus sign (+) for the "SCSI and RAID controllers" entry.

3. Click "LSI SAS 9212-4i RAID Controller" to highlight it.

4. Open the device properties (click Action, and then click Properties).

5. From the Drivers tab, update the driver by browsing to the location of the extracted SoftPaq files.

6. If prompted, restart (reboot) the workstation.

NOTE: After the installation is complete, the download directory can be deleted, if desired.
- HP SoftPaq Number SP56144, "LSI SAS 9212-4i Firmware Utility", is also required with this SoftPaq. HP SoftPaq Number SP56144 can be downloaded from the HP website.

NOTE: Both SoftPaqs are required for supported operations; however, there is no requirement about the order in which they are downloaded and installed.
TITLE: LSI SAS 2308/9212-4i Driver for Microsoft Windows 7 (64-bit Editions)

VERSION: 2.00.51.02 Rev. A
DESCRIPTION:
This package contains the LSI Serial Attached SCSI (SAS) Driver for supported workstations running a supported operating system.

PURPOSE: Recommended
SOFTPAQ NUMBER: SP56513
SOFTPAQ FILE NAME: sp56513.exe
SOFTPAQ FILE MD5: 0x655b00487021cf2df4e9eb79f974936d
SUPERSEDES: None
CATEGORY: Driver - Storage
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

HARDWARE PRODUCT MODEL(S):
HP Z420 Workstation
HP Z620 Workstation
HP Z820 Workstation

SOFTWARE PRODUCT(S):
None

DEVICES SUPPORTED:
LSI 9212-4i4e Adapter

OPERATING SYSTEM(S):
Microsoft Windows 7 64-bit Enterprise
Microsoft Windows 7 64-bit Professional
Microsoft Windows 7 64-bit Ultimate

LANGUAGE(S):
Global

ENHANCEMENTS:
- Provides an updated driver release from LSI.

PREREQUISITES:
- HP SoftPaq Number SP56144, "LSI SAS 9212-4i Firmware Utility", is also required with this SoftPaq. HP SoftPaq Number SP56144 can be downloaded from the HP website.

NOTE: Both SoftPaqs are required for supported operations; however, there is no requirement about the order in which they are downloaded and installed.

INSTALLATION INSTRUCTIONS:
1. Download the file by clicking the "Download" or "Obtain Software" button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions. Note the location where the SoftPaq contents are extracted (the default is C:\SWSETUP\SPxxxxx).

NOTE: After the files have been unpacked, the file downloaded in Step 1 can be deleted, if desired.

UPDATING THE DRIVER
To update the driver, complete the following steps:

1. Open Device Manager (click Control Panel, then click System, then click Hardware, and then click Device Manager).

2. Click the plus sign (+) for the "SCSI and RAID controllers" entry.

3. Click "LSI SAS 9212-4i RAID Controller" to highlight it.

4. Open the device properties (click Action, and then click Properties).

5. From the Drivers tab, update the driver by browsing to the location of the extracted SoftPaq files.

6. If prompted, restart (reboot) the workstation.

NOTE: After the installation is complete, the download directory can be deleted, if desired.


Copyright (c) 2014 Hewlett-Packard Development Company, L.P.
Version:2.00.51.02 Rev. A (15 Apr 2014)
Enhancements
- Provides an updated driver release from LSI.


Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts.
Type: Driver - Storage
Version: 2.00.51.02 Rev. A(15 Apr 2014)
Operating System(s):
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Enterprise (64-bit)
Microsoft Windows 7 Ultimate (64-bit)

Description

This package contains the LSI Serial Attached SCSI (SAS) Driver for supported workstations running a supported operating system.

Enhancements

- Provides an updated driver release from LSI.

Installation Instructions

1. Download the file by clicking the "Download" or "Obtain Software" button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions. Note the location where the SoftPaq contents are extracted (the default is C:\SWSETUP\SPxxxxx).

NOTE: After the files have been unpacked, the file downloaded in Step 1 can be deleted, if desired.

UPDATING THE DRIVER
To update the driver, complete the following steps:

1. Open Device Manager (click Control Panel, then click System, then click Hardware, and then click Device Manager).

2. Click the plus sign (+) for the "SCSI and RAID controllers" entry.

3. Click "LSI SAS 9212-4i RAID Controller" to highlight it.

4. Open the device properties (click Action, and then click Properties).

5. From the Drivers tab, update the driver by browsing to the location of the extracted SoftPaq files.

6. If prompted, restart (reboot) the workstation.

NOTE: After the installation is complete, the download directory can be deleted, if desired.

System Requirements

- HP SoftPaq Number SP56144, "LSI SAS 9212-4i Firmware Utility", is also required with this SoftPaq. HP SoftPaq Number SP56144 can be downloaded from the HP website.

NOTE: Both SoftPaqs are required for supported operations; however, there is no requirement about the order in which they are downloaded and installed.

Release Notes

TITLE: LSI SAS 2308/9212-4i Driver for Microsoft Windows 7 (64-bit Editions)

VERSION: 2.00.51.02 Rev. A
DESCRIPTION:
This package contains the LSI Serial Attached SCSI (SAS) Driver for supported workstations running a supported operating system.

PURPOSE: Recommended
SOFTPAQ NUMBER: SP56513
SOFTPAQ FILE NAME: sp56513.exe
SOFTPAQ FILE MD5: 0x655b00487021cf2df4e9eb79f974936d
SUPERSEDES: None
CATEGORY: Driver - Storage
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

HARDWARE PRODUCT MODEL(S):
HP Z420 Workstation
HP Z620 Workstation
HP Z820 Workstation

SOFTWARE PRODUCT(S):
None

DEVICES SUPPORTED:
LSI 9212-4i4e Adapter

OPERATING SYSTEM(S):
Microsoft Windows 7 64-bit Enterprise
Microsoft Windows 7 64-bit Professional
Microsoft Windows 7 64-bit Ultimate

LANGUAGE(S):
Global

ENHANCEMENTS:
- Provides an updated driver release from LSI.

PREREQUISITES:
- HP SoftPaq Number SP56144, "LSI SAS 9212-4i Firmware Utility", is also required with this SoftPaq. HP SoftPaq Number SP56144 can be downloaded from the HP website.

NOTE: Both SoftPaqs are required for supported operations; however, there is no requirement about the order in which they are downloaded and installed.

INSTALLATION INSTRUCTIONS:
1. Download the file by clicking the "Download" or "Obtain Software" button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions. Note the location where the SoftPaq contents are extracted (the default is C:\SWSETUP\SPxxxxx).

NOTE: After the files have been unpacked, the file downloaded in Step 1 can be deleted, if desired.

UPDATING THE DRIVER
To update the driver, complete the following steps:

1. Open Device Manager (click Control Panel, then click System, then click Hardware, and then click Device Manager).

2. Click the plus sign (+) for the "SCSI and RAID controllers" entry.

3. Click "LSI SAS 9212-4i RAID Controller" to highlight it.

4. Open the device properties (click Action, and then click Properties).

5. From the Drivers tab, update the driver by browsing to the location of the extracted SoftPaq files.

6. If prompted, restart (reboot) the workstation.

NOTE: After the installation is complete, the download directory can be deleted, if desired.


Copyright (c) 2014 Hewlett-Packard Development Company, L.P.

Revision History

Version:2.00.51.02 Rev. A (15 Apr 2014)
Enhancements
- Provides an updated driver release from LSI.